Luckyy 
Administrator
Staff
LEVEL 500
XP
BEFORE YOU CONTINUE YOU WILL NEED A VALID DUMP
1. Flip the PlayStation over then solder a jumper wire as shown in picture
2. now your ps3 should force boot so you'll need to connect your e3 flasher with the valid dump on your sd card
3 set your switches to 1 0 0 0 0 0 0 0 then hit start and wait for it to finish reflashing
4 once it's finished take the e3 flasher off and de-solder the jumper. you should be fully unbricked if the dump was valid
1. Flip the PlayStation over then solder a jumper wire as shown in picture
2. now your ps3 should force boot so you'll need to connect your e3 flasher with the valid dump on your sd card
3 set your switches to 1 0 0 0 0 0 0 0 then hit start and wait for it to finish reflashing
4 once it's finished take the e3 flasher off and de-solder the jumper. you should be fully unbricked if the dump was valid
Last edited by a moderator: